How to repair a Sayco tub and shower body step o 

Home | Ask A question | Plumbing | Heating | A Natural Drain Cleaner | Answered Questions | Donate | Call Me |

Sayco cold water

Make sure the rubber O ring from the old stem has been removed, and that the new O ring on the new faucet stem is in place, 2 O rings will not allow the faucet stem to sit properlly, and will cause a leak, use the stem tool to tighten the new stem into the shower body, make sure it is tight, but don't over tighten it, it is only brass.
Now the new packing nut, this nut needs to be tightened, it does not come tight from the factory, if you do not tighten it, it will leak back into the wall causing damage to the wall and floor behind the tub.
 

 

Plumbing Problems Ask A Question Now

 

Bio Clean Bulk Bio-Clean RootX
Delta Faucets Moen Faucets Gerber Faucets
No Tile Repair Basket Strainer Garbage Disposal
Drain Problems Toilet Flapper Repair Toilet Fill Valve
Bathtub Drain Shallow Jet Pumps Washing Machine
Contractor Ads Find A Plumber Aerator
Hot Water Heaters Heating Problems Boiler Relief Valves
Burnham Boilers Peerless Boilers Weil McLain Boilers
Taco Zone Valves Taco Circulators Honeywell Zone Valves
Oil Burners Expansion Tanks Watts 1156 Boiler Feed
Remove Air From Boiler Replace Blower Motor What's Wrong With This
Disclaimer Contact Me Feed Back
About me Bio Clean Annoyance Fee
Sitemap Privacy Policies No Heat
Sylvan Tieger Plumbing Stories  

Website by: Thomas Petito Reardon
masterplumberthomas@gmail.com