How to repair a Sayco tub and shower body step i 

Home | Ask A question | Plumbing | Heating | A Natural Drain Cleaner | Answered Questions | Donate |

Sayco faucet washer.

Note: the rubber washer at the bottom of the stem, it is very worn and needs to be replaced, just remove the screw at the bottom of the stem, discard the old faucet washer and replace it with a new flat faucet washer, and tighten the screw. But sometimes, the screw at the bottom of the stem holding the faucet washer, will not turn, or the head of the screw that holds the faucet washer in place will have rusted away, and you can not get the screw out, you can drill out the old screw, and tap new threads in the stem, or just get a new stem.
 

 

Plumbing Problems Ask A Question Now

 

Bio Clean Bulk Bio-Clean RootX
Delta Faucets Moen Faucets Gerber Faucets
No Tile Repair Basket Strainer Garbage Disposal
Drain Problems Toilet Flapper Repair Toilet Fill Valve
Bathtub Drain Shallow Jet Pumps Washing Machine
Contractor Ads Find A Plumber Aerator
Hot Water Heaters Heating Problems Boiler Relief Valves
Burnham Boilers Peerless Boilers Weil McLain Boilers
Taco Zone Valves Taco Circulators Honeywell Zone Valves
Oil Burners Expansion Tanks Watts 1156 Boiler Feed
Remove Air From Boiler Replace Blower Motor What's Wrong With This
Disclaimer Contact Me Feed Back
About me Bio Clean Annoyance Fee
Sitemap Privacy Policies No Heat
Sylvan Tieger Plumbing Stories  

Website by: Thomas Petito Reardon
masterplumberthomas@gmail.com