Plumbing and Heating Answers

Skip to main content | Home | Ask A question | Plumbing | Heating | Answered Questions | ANSWERS NOW? | That's Just Some People Talking |

Now put the rubber washers between the pump flanges make sure they do not get pinched and put the 4 nuts and bolts back and snug them up good but don't make them too tight and don't tighten one side more then the other. Now you have to fill the system with water and make sure you don't have any leaks. Then you will need to get the air out of the system

 

Install Taco Pump

 

Previous

Next

About me | Privacy policies | Site Map | Contact me | Feed Back | Disclaimer | Annoyance Fee? |